SMART CARGO LOCK & TRACKER
GPS Satellite Electronic Seal Lock
¿What is?
It is an integrated system that incorporates a padlock or steel wire electronic seal, highly resistant to impact, vandalism and extreme environmental conditions, that enables the protection, tracking and knowing in real time of the status of goods in transit. It is used in containers, vans, trucks and all kinds of moving goods.
ThunderLock also used in a multitude of security applications, enabling assurance and protection for high value assets, mobile or fixed, while monitoring the access to doors having limited access.
Main Features
Allows remote opening of the seal from a control center with different authorization levels
Contingency opening with RFID cards (maximum 50 cards)
Opening via Bluetooth application
Tracking controls by remote sending of OTA commands
Sensors for detecting seal opening and closing
Hermetic, dust and water resistant
Wire cut detection.
2G/3G/4G cellular technology
Numbering of parts
Thunderlock – B Seal parts
1. Electronic Wire of Stainless Steel
The Electronic Wire* of Stainless Steel with a 3/16” caliber and Nylon coating (1/4” caliber, including coating), is the most important element of the seal since it allows to detect the unauthorized entry through its cutting or violation. It incorporates an ingenious “Anti-Bypass” security system, immune to any attempt of seal deception through an electric by-pass.
2. Mobile Terminal Coupling:
Coupling made in stainless steel with a water-resistant system that does not allow the entry of water into the device and allows the mechanical adjustment of the fixed wire terminal.
3. Mobile Terminal:
Terminal in stainless steel with a neodymium magnet at the tip for a coupling adjustment and a system digital closure.
4. Status Indicator:
LEDs that allow to visualize the device’s current status, blocking, opening, flaws, Bluetooth interaction.
5. RFID reader:
Cards detection system that allows the opening of the device when the card is already associated.
6. GPS Indicators:
LEDs that allow to know the connectivity and load status of the GPS device.
7. Protective Rubber Case:
Casing protective accessory to reduce the impact force of the unit, and the deterioration in the face of heavy work.
8. Magnetized Base:
Magnetic system made by two neodymium magnets able to hold the device to containers or to any metallic material to help in its installation.
9. Buzzer:
Sonic indicator that warns of the device’s opening, closure or flaw.
10. Charging Port:
12VDC European type load connection with a polarity protection.
11. Original charger:
This source is the original charger for the device.
ACCESSORIES
Holding bar:
Metal casing that helps provide greater security.
Multiple charger:
Charge up to five devices simultaneously.
Van support:
Ideal for non-ferromagnetic doors.
Backup battery:
Allows the electronic stamp to be charged between 55% and 65%.
Holding bar
Multiple charger
Van support
Backup battery
- Batería interna: 17,400 mAh de Litio recargable
- Operation Voltage: 8 – 32 VDC
- Sim Card Size: 2FF
- Operation temperature: - 15 to 60 °C
- Hermetic, dust and water resistant
- Periodic positioning reports
- Typical alerts: Charge start/end – Movement Start/End – Speed Excess
- Storage Buffer of up to 3000 transmissions
- Control through remote delivery of OTA commands
- Energy saving modes
- LEDs indicating upper part status: -Red: closed – Green: Open -Blue: RFID opening permission -Yellow: wire cutting indicator.
- LEDs indicating lower part status: -Red: Feeding -Green: Network -Blue: Positioning.
- Weight: 2.14 Kg
- Dimensions: 20 cm (height) X 6.5 cm (width) X 14.5 cm (length)
Gallery
Aliados que confían en nosotros
Approved Platforms
Protecting your assets
Clients in several Latin American countries with successful experiences with our device.
Download the brochure
